Modular Origami Instructions - Sonob`e Small Cube

Modular Origami Instructions - Sonobè Small Cube

Stephen Cavilia

September 18, 2008

This is one of two cube models that can be made from Sonobè modules. It is actually a stellated regular tetrahedron, made from six units.

\begin{boilerplate}

Copyright 2008 Stephen Cavilia. Questions and comments should be sent to sac+origami@atomicradi.us. This document is licensed under a Creative Commons Attribution-Share Alike 3.0 United States License.

\end{boilerplate}

The modules are described on the Basic Sonobè instruction page.

Figure 1:

All modules should be creased like this

Figure 2:

Addition of second unit

Figure 3:

Starting to add third unit

Figure 4:

Inserting the other end of the third unit

Figure 5:

Three units completely assembled

Figure 6:

Fourth unit added

Figure 7:

With this color scheme, each ﬁnished side will be symmetrical and include only two of the three colors used

Figure 8:

Adding the ﬁfth unit

Figure 9:

After this point, points need to be bent ﬁrst to ﬁt into the pockets

Figure 10:

Five units completely assembled. There are two pockets and two points to connect to the sixth unit

Figure 11:

Adding the sixth unit

Figure 12:

The completed six-unit cube

docid=sac-ori-mod-so6c; docrev=1; sysrev=2